Presented at ISA EXPO, October 2003.
HIGH INTEGRITY PROTECTION SYSTEMS (HIPS) FOR FLARE LOAD MITIGATION
October 2003
INTRODUCTION TO LAYERS OF PROTECTION ANALYSIS
October 2003
Presented at Mary Kay O’Conner Process Safety Center Symposium, October 2002. Published in Journal of Hazardous Materials, 2003. Presented at ISA EXPO 2003, October 2003.
ENHANCED RISK MANAGEMENT AT THE PASADENA PLASTICS COMPLEX
September 2003
Presented at Center for Chemical Process Safety Conference, Scottsdale, AZ
SOFTWARE-IMPLEMENTED SAFETY LOGIC
June 2002
Presented at Loss Prevention Symposium, American Institute of Chemical Engineers, April 2001. Published in Process Safety Progress, June 2002.
BRIDGING THE SAFE AUTOMATION GAP – PART 2
May 2002
Presented at Mary Kay O’Conner Process Safety Center, Texas A&M University, October 2001. Published in Hydrocarbon Processing, May 2002.
BRIDGING THE SAFE AUTOMATION GAP – PART 1
April 2002
Presented at Mary Kay O’Conner Process Safety Center, Texas A&M University, October 2001. Published in Hydrocarbon Processing, April 2002.
WHAT EVERY MANAGER SHOULD KNOW ABOUT THE NEW SIS STANDARDS
January 2002
Presented at ISA EXPO 2002. Presented at ISA Technical Symposium, Baltimore, Maryland, 2002.
FAULT MANAGEMENT ANALYSIS
November 2001
Presented at Loss Prevention Symposium, American Institute of Chemical Engineers, April 2001. Published in Process Safety Progress, November 2001.
PARTIAL STROKE TESTING OF VALVES
September 2001
Published in Control Engineering, November 2000. Presented at ISA EXPO, September 2001.
ISA 84 – THE STANDARD FOR SAFETY INSTRUMENTED SYSTEMS
December 2000
Presented as Regulations, Standards, and Safety Instrumented Systems, at European Triconex Users Group, Venice, Italy, May 1998 and at ISA EXPO, October 1998. Presented as Safety Instrumented Systems Under the New Standards, ICEX 99 Workshop, Institute of Instrumentation and Control, Melbourne, Australia, May 1999. Presented as Regulations, Standards, and Safety Instrumented Systems at Mary Kay O’Conner Process Safety Center, Texas A&M University, October 1999. Published as Path to 84 Compliance, Factory Mutual Newsletter, July 2000. Published as Setting the Standard for Safety Instrumented Systems, Chemical Engineering, December 2000.